Jump to content

Recommended Posts

Posted (edited)

UPDATE:

 

 

 

Parting out these 3 Drag Bikes. Trust us not what we want to do but our kid is heavy into motocross and doing well. Time to not be selfish.

 

Starting left to right:

 

(Left) Primer Red one is a 10Mil Cheetah cub 465cc on Alky: Dyno'd 114 HP

 

 

Want to try and sell motor as a complete first asking: $5000obo

 

  • Billet 10mil crank
  • Nate McCoy Drag ported Cheetah cub, Wosner pistons, Noss Machine cool head with custom domes
  • Vforce 2 Reeds
  • OEM stator
  • Clean bored stock cases
  • White Knuckle Billet manifold
  • 1st down 2-5 Dunable override:
  • Shearer BB OOF Left side pipes: $550
  • Packard Lectron Alky carbs 40's : $750
  • Pods: $45
  • Dyna Ignition: $275
  • Aluminum Gas tank 1.5gal: $ 150 SOLD
  • +10chrome ladder bar swingarm: $350
  • JJ&A Carrier: $70 SOLD
  • JJ&A Drag Axle: $400 SOLD
  • 10in extended front stock and lightened frame, Stellar Chromoly J-Arms, and Custom Steering Stem, and radiator, aprox 60% chromoly,Powder Coat  Black no title: $800 
  • Sling Shot clutch: $275
  • Front Marvins 14.5": $250
  • Rear Marvins 14.5": $130 SOLD
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Rear Paddles 22x11x8 10paddles triple buff: $450
  • Cut Down Black vinyl seat: $100
  • Misc internals and externals (chain guides,plastic, tensioners..etc): PM

 

(Center) Blue one is a 4mil Cheetah cub 421cc on gas: Dyno'd 105HP

 

Parting this motor:

 

  • 4mil Hot Rod Crank: $250
  • Nate McCoy Drag Ported Cheetah Cub *polished*: (pistons and domes) $1400 SOLD
  • Pro Design Cool Head: $75
  • OEM Stator with timing plates: $150
  • Vforce 2 reeds: $150
  • Clean stock Cases: $200
  • 1st down 2-5 Dunable override:$250
  • In Frame BB Shearer Pipes Chrome: $500 SOLD
  • +8 Oval housing Top Dog chrome swing arm with flame design:$400 SOLD
  • Torch works aluminum radiator, slight bend from crash but works fine and is nice: $150
  • Roll Design Steering Stem with LSR bar clamp: $ 300
  • Chrome Clutch case: $100 
  • Hinson full basket 7 disc clutch straight cut gear and flat bearing: $600
  • MOD QUAD Flame design Chrome stator cover: $ 150
  • Chrome J-arms made by custom creations: $275
  • Billet Manifold for 35's: $75
  • Aluminum tie rods: $25
  • Lightened Stock Frame, Black no title: $400
  • 22x11x8 Extreme buff's with 8 paddles: $450
  • Trimmed Blue plastics:$150
  • Custom covered seat with iron cross: $100
  • Billet Front hubs LSR no front brakes: $150
  • 40mm axle carrier: $70 SOLD
  • Revalved Rear OEM shock done by TCS Hillshooter shock: $300
  • 20" Front smoothies: $275 SOLD
  • Misc internals and externals (chain guides, tensioners..etc): PM

 

 

(Right) Green One is a 4mil Supercub 485cc on Alky: Dyno'd 114HP

 

Want to try and sell motor as a complete first: $5000obo

  • Noss Machine Super Cub Cool Head with custom to the cylinder domes
  • Nate McCoy Drag ported Cylinder *polished* 73 bore instead of 72
  • Neutral Down dunable 1-5 override
  • Lock up clutch
  • OEM stator
  • Clean Cases match ported bored for Super Cub cylinder
  • 39 PWK Alky Carbs, need new power jets, I can buy some and put them in whatever works: $450
  • Pods:$45
  • BB OOF Left side CPI's: $500
  • +8 ladder bar chromoly swing arm a little ruff: $200 SOLD
  • Custom Creations drag chrome A-arms: $ 450
  • Aluminum tie rods: $25
  • White Knuckle Drag Axle: $ 450 SOLD
  • Aluminum Radiator: $ 125 SOLD
  • Chrome Stock Steering Stem: $100
  • Front Marvin Shaws 14": $250
  • Rear Marvin Shaw 13": $130 SOLD
  • 22x11x8 10 paddle Extreme Haulers Triple Buffs: $450
  • Front Smoothies JJ&A 18'swith lightened rims 10x4 drag cut: $ 275
  • Mod Quad Polished Stator cover: $150
  • Polished Clutch Cover White knuckle: $150
  • Super cut down vinyl/fabric black checkerboard seat: $100 SOLD
  • Lightened Stock frame metallic purple has title: $500
  • Misc internals and externals (chain guides, tensioners..etc):PM

 

NOTHING INCLUDES SHIPPING.

 

 

 

PM me your number and what you want a picture of or just PM for questions.

 

 Some of it may not be taken apart yet but we are working on it right now.

Edited by DragBikeParting
  • 1 month later...
  • 1 month later...
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...