dunebuggy09 Posted May 3, 2014 Report Posted May 3, 2014 Going with a new setup this year so I dont need these anymore. Setup for a .012" base gasket, stock stroke, stock 110mm rod length. Current bore is at 64.75 mm, Ran consistant 4.4's with best of a 4.36 with a 170 pound rider in a dune chassis. Ran with 39 mm alky carbs, shearer small bore pipes, and a milled stock head. Took them off my bike last year and have been sitting ever since. There is 2 small 1/8" holes that were filled in with epoxy on the intakes, worm holes were attempted by previous owner but failed. Doesnt affect running at all.. $275 shipped http://i1113.photobucket.com/albums/k513/macdaddyracing/photo_zpsd868a7bb.jpg http://i1113.photobucket.com/albums/k513/macdaddyracing/photo3_zps30b1be10.jpg http://i1113.photobucket.com/albums/k513/macdaddyracing/photo4_zps8670777c.jpg http://i1113.photobucket.com/albums/k513/macdaddyracing/photo1_zps60a6b2a8.jpg http://i1113.photobucket.com/albums/k513/macdaddyracing/photo2_zps3b226e51.jpg Quote
dunebuggy09 Posted May 11, 2014 Author Report Posted May 11, 2014 $250 shipped, need these gone. Quote
dunebuggy09 Posted May 13, 2014 Author Report Posted May 13, 2014 Jesse from MacDaddy Racing touched them up for me. Whoever originally ported them did a hack job and Jesse cleaned them up the best he could with what was left. He wasn't happy with them but I think he did a pretty good job from how bad they originally were. They definitely hold their own now though. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.