aleyesonme Posted October 28, 2013 Report Posted October 28, 2013 Hello everyone.....in the wanted section i have a wheelie bar listed to buy...so just in case i dont happen to find one for sale than i would like to make my own...my neighbor welds for a living so i can get him to do the weld work...but i have no clue where to start. I need a bar thats 50 to 52 inches long, i do know that since thats the bike length...but as far as the piping, width, what to use, etc i have no clu..so if anyone has built one or have experience this diy project please lead me in the right direction...thanks Quote
Surfrjag Posted October 28, 2013 Report Posted October 28, 2013 I used 3/4" diameter .058 thickness chromolly tube i got from wiksaircraft supply welded some heims on the upper bars for some adjustability. Heim sets on ebay Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.