Engberg27 Posted October 22, 2013 Report Share Posted October 22, 2013 I bought a banshee and the carbs don't fit the stock boot.. The outside of the carb measures 40.94mm. I pretty much needs these to finish my build anything will help. Thanks Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 what kind of carbs are they and size of carb would help Quote Link to comment Share on other sites More sharing options...
Engberg27 Posted October 22, 2013 Author Report Share Posted October 22, 2013 They are keihin flat slide carbs. That is all I know I bought this thing and now I am peicing it back together. They are obviously way bigger then the stock intake boot. Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 for sure well if you have a micrometer measure the inside of the carb that would slide into the intake and tell me what mm you come up with Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 they are probably 38mm or 39 mm carbs Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 im guessing but let me know what u come up with and we can get u pointed in the right direction Quote Link to comment Share on other sites More sharing options...
Engberg27 Posted October 22, 2013 Author Report Share Posted October 22, 2013 Ok I measured the inside and it is 1.467 inches or 37.2mm Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 ok well is there any stampings on the side of the carb right above the bowl ? Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 like this Sent from my iPhone using Tapatalk - now Free Quote Link to comment Share on other sites More sharing options...
Engberg27 Posted October 22, 2013 Author Report Share Posted October 22, 2013 Trying to upload pics its not working.....no stamp it's says keihin Japan where yours says pwk but on the flat part right below that it says pj. Quote Link to comment Share on other sites More sharing options...
Engberg27 Posted October 22, 2013 Author Report Share Posted October 22, 2013 Pj67ra2sel Quote Link to comment Share on other sites More sharing options...
hp2000 Posted October 22, 2013 Report Share Posted October 22, 2013 (edited) keihin PJ 34mm Gas carb. Sent from my iPhone using Tapatalk - now Free Edited October 22, 2013 by hp2000 Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 22, 2013 Report Share Posted October 22, 2013 There you go man it's a 34 mm carb And I have the intakes you need to make them work Shoot me a p.m. if you're interested And just so you know Stock carbs are 28 mm Mikuni's So I hope you have a little motor work done to your bike To compensate for the size of your carbs Quote Link to comment Share on other sites More sharing options...
Engberg27 Posted October 22, 2013 Author Report Share Posted October 22, 2013 Thanks for your help guys...it came with a 50 over top end not installed. I guess I better bring it in for a bore job Quote Link to comment Share on other sites More sharing options...
Hazzard Racing Customs Posted October 23, 2013 Report Share Posted October 23, 2013 Yep Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.