BANSHEEBEEFM2M Posted September 20, 2013 Report Posted September 20, 2013 (edited) i just recently picked up a 4 mill shee i wanna freshen up the top end. do i just order regular wisecos (same bore as the jugs obviously). and does the trinity head use the same o ring kit and or domes as the pro design head? Edited September 21, 2013 by BANSHEEBEEFM2M Quote
BANSHEEBEEFM2M Posted September 20, 2013 Author Report Posted September 20, 2013 (edited) . Edited September 21, 2013 by BANSHEEBEEFM2M Quote
#1JUANstunna Posted September 21, 2013 Report Posted September 21, 2013 Depends on if its a long rod or short rod motor. Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 how can i tell? Quote
#1JUANstunna Posted September 21, 2013 Report Posted September 21, 2013 Rod length, series of pistons used. etc. Quote
oldskool Posted September 21, 2013 Report Posted September 21, 2013 Short rod is 110mm = 513 wiseco piston Long rod is 115mm = 795 wiseco piston Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 @rappy the stage 4 head? oldskool thank you. Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 i plan on going with wisecos and an agressive top end port not a full out drag port but really close Quote
fappy'97 Posted September 21, 2013 Report Posted September 21, 2013 Anything trinity. Stay away from it all. Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 whats so bad about just using their head? i know they build a lot of lemons Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 whats so bad about just using their head? i know they build a lot of lemons Quote
#1JUANstunna Posted September 21, 2013 Report Posted September 21, 2013 Nothing wrong with the head, trinity just sucks balls. You can use the head just get the proper domes for your porting, fuel used, and configuration. 1 Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 does it use the same o ring kit and domes as the Pd head? Quote
BANSHEEBEEFM2M Posted September 21, 2013 Author Report Posted September 21, 2013 does it use the same o ring kit and domes as the Pd head? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.