dave5.0 Posted September 8, 2013 Report Share Posted September 8, 2013 I put 400ex rear hubs on a banshee axle. 250rs aren't the same spline? Quote Link to comment Share on other sites More sharing options...
oldskool Posted September 8, 2013 Author Report Share Posted September 8, 2013 honda carrier and axle on the shee or vise versa my buddy did it with his YFZ Like this, but I ended up drilling like rappy said in the beginning. The Douglas wheels were easy with good spacing. The stock wheels pain in the ass and look like shit with four sets of two holes right together. when I put a board on a bucket and turn axle to check and see how true they are turning, I'm getting 1/8 to 1/4 difference. Gonna run them and run them hard. Next time axle carrier swap. Thanks Quote Link to comment Share on other sites More sharing options...
Juss11 Posted September 8, 2013 Report Share Posted September 8, 2013 I got 250r Hubs on my banshee Quote Link to comment Share on other sites More sharing options...
oldskool Posted September 8, 2013 Author Report Share Posted September 8, 2013 I got 250r Hubs on my banshee Not on stock axle? Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted September 8, 2013 Report Share Posted September 8, 2013 Not on stock axle? Mine is on a stock spline lonestar axle. Same thing. Quote Link to comment Share on other sites More sharing options...
oldskool Posted September 8, 2013 Author Report Share Posted September 8, 2013 My axle in banshee is stock. Not sure about axle in 250r, but no way in hell will my banshee hub go on 250r axle. It don't even get to the splines Quote Link to comment Share on other sites More sharing options...
Starwriter Posted September 8, 2013 Report Share Posted September 8, 2013 Maybe 250r hubs are different for different years. Quote Link to comment Share on other sites More sharing options...
oldskool Posted September 8, 2013 Author Report Share Posted September 8, 2013 Maybe 250r hubs are different for different years. Could very well be. The piston and rod are different between 86&87,88,89 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.