Jrod324 Posted August 27, 2013 Author Report Posted August 27, 2013 If you just have two cables on top of ur carbs right into the caps the TORS has been deleted. If you have 2 large control boxes on top of ur carbs with 2 wires, one black the other yellow and black, are your TORS units. There is a black module with 3 wires going to it somewhere in your harness and that is your TORS module - if it is NOT present than maybe a previous owner deleted it already. Generally the box is mounted under the fuel tank on the lh side if you are sitting on the bike. Out of curiosity have you tried running the bike since u cleaned ur carbs? Thats what i was gonna tell you it looks like the prev owner removed tors already cuz he said he jetted the carbs and there was no tors module on the bottom LH side... No i didnt have a chance to test it out that day cuz i got a late start on it and i had to drain out the gas it had cuz my cousin mixed it with too much oil (8 ounces per gallon ) so i gotta put new gas with less oil in it this friday is my next day off that i am going to put fresh gas and test it.... I got a question if theres no idle screw on carbs is there another way to increase idle cuz he told me before i bought it he lowered idle (forgot why) but i think thats why bike wont idle and turns off unless im giving it gas.... Quote
Young Guns Racing Posted August 28, 2013 Report Posted August 28, 2013 ahhhhhhh. This all makes sense now. he installed a TORS delete kit with new caps and all but did not modify the old carbs to accept idle screws. If I were you - id buy some and do it. If you do not want to. Then you will have to play with syncing your carbs manually by the "tension" adjustments on your caps. This will be difficult and unreliable. I had a buddy's bike he did the same way, run fine one day, next one of the cables would loosen up and caused all kinds of issues. installed idle screws and bang, no issues.Heres what you need >>> http://www.ebay.com/itm/Yamaha-Banshee-Idle-KIt-w-Air-Screws-tap-drill-bit-/200256535724?pt=Motors_ATV_Parts_Accessories&hash=item2ea0383cac&vxp=mtr Quote
Jrod324 Posted August 28, 2013 Author Report Posted August 28, 2013 ahhhhhhh. This all makes sense now. he installed a TORS delete kit with new caps and all but did not modify the old carbs to accept idle screws. If I were you - id buy some and do it. If you do not want to. Then you will have to play with syncing your carbs manually by the "tension" adjustments on your caps. This will be difficult and unreliable. I had a buddy's bike he did the same way, run fine one day, next one of the cables would loosen up and caused all kinds of issues. installed idle screws and bang, no issues. Heres what you need >>> http://www.ebay.com/itm/Yamaha-Banshee-Idle-KIt-w-Air-Screws-tap-drill-bit-/200256535724?pt=Motors_ATV_Parts_Accessories&hash=item2ea0383cac&vxp=mtr Looks like we finally hit the end of our journey lol thanks johnny boy for your help ima just get the screws then to not do it the lazy way and just get it done right ill let you know how it turns out Quote
Jrod324 Posted August 28, 2013 Author Report Posted August 28, 2013 Any tips when installing it or is it pretty simple? Quote
Young Guns Racing Posted August 29, 2013 Report Posted August 29, 2013 Its fairly simple and pretty self explanitory. Im sure there are write ups on it here on the hq Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.