davidj5491 Posted November 3, 2003 Report Share Posted November 3, 2003 Hey guys, I think I've decided to sell/part out my drag banshee. I'd rather sell it as a complete bike, but will part out if I have to. I'm starting a new project, and need to get rid of one toy before building another. My bike is an 87 frame, it's been powdercoated black with silver sparkle in the clearcoat. It's got a HSCustoms lightweight drag racing front end (A and J arms, tie rods, spindles) that has been show chromed. It's got a HSCustoms +4 round housing aerotube swingarm that has been show chromed. I had a lot of the stock pieces chromed as well, such as the throttle assembly, the front and lower motor mounts, and the rear master cylinder. It's got CPI out of frames, PVL ignition, Direct drive lockup and polished cover. The motor is a 370lr, with ProDesign cool head, a 2-5 auto tranny, Hinson outer basket. It breathes through VForce reeds, 35PWK carbs, and clamp-on K&N's. Some billet stuff also included are the stator cover, water pump cover, shifter, brake pedal, and foot pegs. The front wheels and tires are Douglas 10x4 with scooter tires. I have 2 sets of rear wheels and tires. A set of studded Ohtsu radials, and a set of Pro-Wedges. I'm sure there are some things that I didn't write in, but that's a pretty good rundown of the parts on this bike. As I said before, I'd rather sell it complete, but will part out if I have to. If anyone is interested, please contact me here on this forum, by PM, or email me at djohnson@bullitt.k12.ky.us. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Josh A. Posted November 4, 2003 Report Share Posted November 4, 2003 Im interested in the FRONT END,the billet stator cover,the ignition and the billet brake and shifter,Pro wedges,and the V-force reeds,give me some prices,and a pic of the front tires and rims,i may want those also, Quote Link to comment Share on other sites More sharing options...
MULLET~BOY Posted November 4, 2003 Report Share Posted November 4, 2003 how much for the lock up and cover Quote Link to comment Share on other sites More sharing options...
Chemical Castration Posted November 4, 2003 Report Share Posted November 4, 2003 I'm interested in the stator cover shifter and brake pedal. Is your steering stem aftermarket? Quote Link to comment Share on other sites More sharing options...
Screamin_Banshee Posted November 4, 2003 Report Share Posted November 4, 2003 im interested in... throttle assembly, the front and lower motor mounts, PVL, and front wheels and tires. Show us some pics, and prices? Quote Link to comment Share on other sites More sharing options...
davidj5491 Posted November 4, 2003 Author Report Share Posted November 4, 2003 Wow, I wasn't expecting this many replies so quick.... I don't have any pics with me right this second, but I'll try to get some up as soon as possible. The only pic I do have is an action shot. you can go to http://www.littlesandy.com/images/MVC-468F.JPG and see it. Now for the pricing: Front end - paid $1300 total, asking $600 Stator cover - asking $150 PVL - $425 brake pedal and shifter - $75 Pro-Wedges on rims - $125 VForce reeds - $100 Front rims and tires - $75 Lockup and polished cover - $275 All chrome motor mounts - $50 Throttle assembly - $75 I'll try to get some better pics up this afternoon for you guys to see. Thanks again for looking. Quote Link to comment Share on other sites More sharing options...
Josh A. Posted November 5, 2003 Report Share Posted November 5, 2003 I can have the money for the front end by the 25th of this month,WHAT ALL IS INCLUDED WITH IT??? Quote Link to comment Share on other sites More sharing options...
Chemical Castration Posted November 5, 2003 Report Share Posted November 5, 2003 what kind of shifter/brake lever? Got any pics? Quote Link to comment Share on other sites More sharing options...
davidj5491 Posted November 5, 2003 Author Report Share Posted November 5, 2003 Josh A. - The front end comes with everything needed. A arms, J arms, all the heim joints, custom spindles, and tie rods. All of which has been chromed. It's a real good looking setup, the best I've seen for a J arm bike. Lefty - The shifter is a pro design piece, and the brake pedal is Hinson. I don't have pics, but can get some. Thanks again for looking guys. Let me know what you think. Quote Link to comment Share on other sites More sharing options...
Josh A. Posted November 6, 2003 Report Share Posted November 6, 2003 Do you have the shocks too? Quote Link to comment Share on other sites More sharing options...
davidj5491 Posted November 6, 2003 Author Report Share Posted November 6, 2003 Yep, I have the Marvin Shaw shock also. I'll let those go for $250. Let me know. Thanks again, David Quote Link to comment Share on other sites More sharing options...
Josh A. Posted November 6, 2003 Report Share Posted November 6, 2003 So,front end and all 3 shocks 1000 shipped???How about that? Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted November 6, 2003 Report Share Posted November 6, 2003 GOT A PINGLE? AND SOME ALKY CARBS? ILL TAKE THE REEDS MAN GIVE ME THE INFO IN A PM, ALSO INTRERESTED IN THE PVL BUT WILL U TAKE LESS I CAN GET A NEW ONE FOR 400 THANKS Quote Link to comment Share on other sites More sharing options...
sneeky Posted November 6, 2003 Report Share Posted November 6, 2003 pipes $? front rims and tyres $? what rear tyres / rims do you have ? complete engine $? cylinders $? make the effort list everything and put a price on them. cheers Geoff. Quote Link to comment Share on other sites More sharing options...
Josh A. Posted November 7, 2003 Report Share Posted November 7, 2003 MRMOONEY I have 36 mm alky keihin airstrikers for sale,ran 2 trips,dialed in for pismo,Im going to go back to gas,they were converted and bought from Buddy Deville@ Southern Style ATVs,400 obo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.