LiveFast Posted June 15, 2013 Report Share Posted June 15, 2013 I just finished doing a crank and top end in my banshee. I got it together, and no spark. The tors are still on the carbs. I'm hoping it's not my stator. Maybe the tors, and is there a way I can unplug them until I get the kit? I just want to ride this weekend! Quote Link to comment Share on other sites More sharing options...
Starwriter Posted June 15, 2013 Report Share Posted June 15, 2013 Just unplug the small black box under the left front of the tank. It has a 3 wire connector. When you unplug that, it disables the whole TORS system. Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted June 15, 2013 Report Share Posted June 15, 2013 check the pickup gap as well make sure its .020 Quote Link to comment Share on other sites More sharing options...
LiveFast Posted June 16, 2013 Author Report Share Posted June 16, 2013 Thanks guys, unplugged the tors from the box and gap was good then it started sparking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.