Best jetting

[Jpan350]

I have a 98 with t5 pipes, dual k and n with no box, bored .010 over, stock carbs....the man I got it from wont tell me anything about it and I'm finding out and repairing as I go...what would be the best jets to go with for this set up?

[SAVAGE420]

http://bansheehq.com/forums/index.php?showtopic=99361

 

Read that! ^^^

 

Elevation? Temps? ect...

 

What's in there now for jets and adjustments? What's it doing now that is wrong and right?

[Jpan350]

Thanks man

[Larry's Shee]

A thanks and no answer to questions.

[Jpan350]

had to wait till i could get to a computer...anyway

 

1) What type of aftermarket exhaust do you have?
t5
2) What type of airfilter do you have?
dual k&n
3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all
no air box
4) What is your elevation? (If you don't know, go here: http://www.topozone.com )
800ft
5) What size pilot jets are you using?

6) What size main jets are you using?

7) What temperature is your Banshee jetted for?
75-80
8) Do you have a port job?
no
9) What kind of carbs?
stock
10) What size carbs?
stock

[tdod101]

Dude I have the same set up! Except I have vforce 4 reeds, try 290 main, 27.5 pilot a/s 1.5 turns out and needle at middle clip. That seems to be ideal. I have 300's in mine but I like to run a little rich

[Jpan350]

Thanks man that gives me a good starting point

[tdod101]

Thanks man that gives me a good starting point

I'm gonna give some credit to Larry's Shee. He helped me out when I needed it, he seems to be the man when it comes to tuning carbs, pm him I'm sure hell help