4mil wiseco crank

[junkyarddog]

4mil crank hey what's this worth it had a pvl fly wheel and key come apart and got in to the 1st and ate up the shaft a little bit sand trax said I could buy the left side of crank and repair it have it trued and welded rod bearings are good and tite just the1 bearing was bad and got taking off we put a new flywheel on it and it sets were it should we micked it off a brand new 4mill I even have the 100 bearing kit for it trying to se if it will bring any money to fund me some cylinders also have a hot rod crank 4mill needs rod bearings its trued and welded was in a running bike it stared nocking and we putted it back to truck and took it home

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/66D590CF-1BCB-4D84-A065-8631C66A89DA-51362-00000A57474E5E9F_zps269a0b45.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/C2CFBB7B-BA66-4BC8-96C8-29416FBF1C31-51362-00000A5752822A4C_zps1540a6aa.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/E4875E45-50E7-47B5-954A-15E66BDBEBB1-51362-00000A576596DC1D_zps96fe7b96.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/66D590CF-1BCB-4D84-A065-8631C66A89DA-51362-00000A57474E5E9F_zps269a0b45.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/424B128B-A567-4319-9CB2-AAF5E0A9E1B6-51362-00000A578097558F_zps43ff71bd.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/7598DC30-081F-417A-94DE-96B934427FE6-51362-00000A5788338CD6_zpsd414d774.jpg

 

http://i1309.photobucket.com/albums/s621/junkyarddog1/91A29DC1-3B1B-4689-99C9-9379C03CD426-51362-00000A576E9BF174_zps9734e87c.jpg