stock carb idling problem

[BeeCanBanshee]

Ok so I have lrd adjustable pipes, +5 timing, vf2's, cool head 20cc domes, mild port, stock carbs tors delete with uni pods. Switching to a airbox with k&n's soon. Elevation is 88ft above sea. 65 degrees had 25 pilots and 300 mains. It idled fine but would hang when gas was tapped. So I switched to a 27.5 and the hanging stoped but it won't idle. At the moment idle screws are all the way in and mixture screws 2 turns out. Carbs are clean and synced. Any ideas.

[BeeCanBanshee]

Sorry the air box is the no top aluminum one CFM performance with k&n filters.

[noonansar]

Try adjusting the air (mixture) screw in half turn increments. Mine seems to idle good around 1 1/2 turns out , but every bike is different. Have you changed plugs lately? Fouled plugs can effect idle too.

[BeeCanBanshee]

I'm changing plugs today and I turned them in to 1.5 turns.

[toytech]

did you grind enough off the carbs for the idle screws to raise the slides enough? also make sure the choke tube is tight on the carbs.

[BeeCanBanshee]

Choke tube is just on with no clamps. That's how I got em. And I didn't install the tors delete. But was thinking that might be the problem.

[oldskool]

did you grind enough off the carbs for the idle screws to raise the slides enough? also make sure the choke tube is tight on the carbs.

x2 look in your carbs and see if the idle screw moves the slide when you adjust it. If the slides don't move when the screw is turned in all the way you need to take some more off the carb body(outside)