chayote86 Posted April 19, 2013 Report Posted April 19, 2013 I just rebuilt my banshee and I went to crank the kick starter by hand and it was stuck. I messed with it some more and it would crank over a few times and then it would get stuck? Something under the clutch cover maybe? I'm afraid actually try to start it and screw something up! Thanks Ro Quote
BeeCanBanshee Posted April 19, 2013 Report Posted April 19, 2013 Kicker gear not on right maybe? Quote
chayote86 Posted April 19, 2013 Author Report Posted April 19, 2013 That's what I was thinking will check them tonight Quote
Jereme6655 Posted April 20, 2013 Report Posted April 20, 2013 If its not those.....I have seen where a buddy managed to squeeze a piston into the cylinder on a cr125 without getting the piston ring correctly on the ring land post.......so the ring was sticking out HARD into the side of the cylinder. Kicker was really hard to move. But I wouldn't worry too much about that......USUALLY its the kicker gear bushing or something bound up with the gear. Find it...fix it....and keep us informed. Quote
Burt Reynolds Posted April 21, 2013 Report Posted April 21, 2013 I would check those rings and make sure they arent spun around on you. Quote
chayote86 Posted April 21, 2013 Author Report Posted April 21, 2013 I'm gonna check up on that today thanks guys Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.