davidonmars Posted April 19, 2013 Report Posted April 19, 2013 Need to know what direction to put both crank seals ASAP Quote
wfobasheeboy Posted April 19, 2013 Report Posted April 19, 2013 Need to know what direction to put both crank seals ASAP ImageUploadedByTapatalk1366379727.213049.jpgImageUploadedByTapatalk1366379748.631804.jpg This seal with the tabs. The tabs face the bearing Quote
davidonmars Posted April 19, 2013 Author Report Posted April 19, 2013 So the green part faces inside clutch cover? Quote
wfobasheeboy Posted April 19, 2013 Report Posted April 19, 2013 ImageUploadedByTapatalk1366379827.573146.jpgImageUploadedByTapatalk1366379861.174749.jpg On this seal. The side with all the info on face out. It is time for you to get a copy or down load a manual. All this info is in there. Quote
wfobasheeboy Posted April 19, 2013 Report Posted April 19, 2013 So the green part faces inside clutch cover? Are you talking about the green dot on the small seal on the stator side? The clutch side seal should not have a green dot. Quote
Pastrykiller Posted April 19, 2013 Report Posted April 19, 2013 Springs always face the outside. Quote
04_blu_shee Posted April 19, 2013 Report Posted April 19, 2013 On the OEM yamaha crank seal on the stator side the green dot or mark faces out Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.