Junkyshee Posted April 15, 2013 Report Posted April 15, 2013 Alright kind of new to the banshee world, so I'm fine with being called retarded lol. My banshee is .60 over with stock pipes and stock carbs and stock jets, I live in southern Kentucky and temps are anywhere between 60 and 85. What size jets should I be running, because mine seems to be running out of fuel on the big end. If you read my thread in repairs you'll understand a little more. Long story short My banshee has sit in my garage for 9 years after it quit firing, some idiot that was "professional" took it and bored it and freshened it up and never got it running. So my dad parked it and I just bought it from my dad and drug it out 2 weeks ago and got it running. First time it's been ran on bore. Just seems like it cuts out on big end pretty bad. Thanks in advance guys. Without you all this thing would still be sitting and not running. Quote
lil Doobie420 Posted April 15, 2013 Report Posted April 15, 2013 check the float hight also might be draing the bolws on top side Quote
Junkyshee Posted April 15, 2013 Author Report Posted April 15, 2013 Will definitely check that ^^^ Quote
lil Doobie420 Posted April 15, 2013 Report Posted April 15, 2013 i think it supesed to be at 19mm or 20 Quote
noonansar Posted April 16, 2013 Report Posted April 16, 2013 Have you pulled the carbs and completely cleaned them? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.