chads300 Posted April 10, 2013 Report Posted April 10, 2013 well i am going to pull the trigger on parts today and ebay has a wiseco bottom end rebuild kit for 365 bucks. are these decent parts as i dont feel like doing this over twice? i am going to start building my 4 mill from scratch in a month Quote
stroked Posted April 10, 2013 Report Posted April 10, 2013 I had there hot rod 4 mill crank never had a problem with it. Would recommend it. Quote
sheerider11 Posted April 10, 2013 Report Posted April 10, 2013 I heard a lot of dirt bikes blowing the cranks apart 1 Quote
Wildcard2 Posted April 10, 2013 Report Posted April 10, 2013 Is it a rebuild kit for a hot rods crankshaft? What parts are included for that amount? What kind of bearings are they? What HP is the bike this is going in? Quote
oldskool Posted April 10, 2013 Report Posted April 10, 2013 That sounds cheap. Can you post a link Quote
chads300 Posted April 10, 2013 Author Report Posted April 10, 2013 http://www.ebay.com/itm/WISECO-BOTTOM-END-REBUILD-KIT-CRANKSHAFT-GASKETS-SEALS-87-06-YFZ-350-BANSHEE-/140605773158?pt=Motors_ATV_Parts_Accessories&hash=item20bcc1d566&vxp=mtr Quote
04_blu_shee Posted April 10, 2013 Report Posted April 10, 2013 Go with the Hot Rods product...you cant go wrong, you build it right, bottom end most important you will be happy Quote
chads300 Posted April 10, 2013 Author Report Posted April 10, 2013 as far as hp the bike only has some port work done,fmf full exhaust v force reeds, and .30 top end and a kand n filter....basically trying to get a crank and top end on so i can ride it while the other motor is under way Quote
oldskool Posted April 10, 2013 Report Posted April 10, 2013 I must be confused, your talking about building a 4mil, but that link doesn't say 4mil crank. I think its a stock stroke kit Quote
chads300 Posted April 11, 2013 Author Report Posted April 11, 2013 yes i was curious if anyone has ran these cranks and any known issues Quote
01Twin Posted April 11, 2013 Report Posted April 11, 2013 Hot rods all the way! And I can do a 4 mil hot crank with a 5 mil long rod (403cc) for $428 free shipping.. the wiesco cranks are $401.50 for stock and $466.50 for a long rod stroker. But like I said I think hot rods is a better product! Quote
Starwriter Posted April 11, 2013 Report Posted April 11, 2013 http://www.ebay.com/itm/WISECO-BOTTOM-END-REBUILD-KIT-CRANKSHAFT-GASKETS-SEALS-87-06-YFZ-350-BANSHEE-/140605773158?pt=Motors_ATV_Parts_Accessories&hash=item20bcc1d566&vxp=mtr Wow! That sellers feedback is almost as bad as Minky's Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.