Methanol stocker

[gordo_dk]

Wats up peeps, I'm new to running alcohol so what tips do you guys have for me as far as premix and oils...also is it safe to break in the bike on 91 pump gas???

[camatv]

stocker like what?

 

only about 3-4 oils actually mix with meth/alky.  pingle, drilled cap, more bowl capacity and much different jetting and different float needle and seat it can be done with stock carbs.  

[gordo_dk]

Stock cylinder

[gordo_dk]

And I'm running maxima 927

[Ray_barnes22]

Klotz supertech

[Finch]

im mixing mine at 24:1 benol  i did my initial start up on gas just to make sure it would fire if ya have porting and domes for alky tho dont put a load on it. get your carbs set up. we really need more info are ya just taking a stock motor and wanting to run alky threw it or what? be careful or your could have something like this happen the first day

[gordo_dk]

It's a stick cylinder motor, on its first bore (64.50)...ported,advanced timing, lightened flywheel,vf4, 34 pjs(alky), coolhead alky domes not sure what size though...so can I break it in on 91 octane??

[Finch]

why do you want to?

[gordo_dk]

Just asking....I'm new into having alky banshee...

[Finch]

id just do it on methanol no reason to do it on gas wont run worth a shit anyway

[gordo_dk]

Ok cool...thanks for the advice

[springer]

32:1 super techniplate FTMFW.   i used to run benol, shit is nasty.  techniplate mixes better imo and its not near as nasty.  some do run 24:1 but i personally think it is overkill.  i went from 24:1 to 32:1 and haven't had any problems since... that was 2 years ago.

[gordo_dk]

And that is how many ounces per gallon??

[Crazykane]

4