Elijah'sBanshee Posted March 11, 2013 Report Posted March 11, 2013 Okay so i took my banshee out over the weekend and had many stupid problems but my main problem is the left carb. The slide keeps turning inside of the carb and getting bound of and going WOT through the woods. Its like the pin in the carb isnt doing its job, its not broke off and i have it straight up and down. Not real sure what to do. Any help would be great Quote
apeik Posted March 11, 2013 Report Posted March 11, 2013 Maybe carb slides are in backwards? Check for wear if not. Quote
Elijah'sBanshee Posted March 11, 2013 Author Report Posted March 11, 2013 There not in backwards, slide have little wear but nothing bad Quote
BUILDER Posted March 11, 2013 Report Posted March 11, 2013 Factory slides will do that they may not show much wear but that is a common problem for factory slides to stick. Replace the slides and it will stop doing that Quote
Elijah'sBanshee Posted March 12, 2013 Author Report Posted March 12, 2013 That pin in the side was popping out, tapped it in with a screw drive and hammer works excellent for now. Thanks for the responses though! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.