joewest Posted February 21, 2013 Report Posted February 21, 2013 Some of the screws holding my air intake on are all rusted and i can get a Phillips bit in them. Theres not much room too work with there either. How can i get these out??? Quote
HolySheet Posted February 22, 2013 Report Posted February 22, 2013 Use a flathead that spans all the way across. Or get a bigger Phillips and tap it in with a hammer. Quote
joewest Posted February 22, 2013 Author Report Posted February 22, 2013 I dont see how u would get a hammer in there to tap it im having to use a phillips head bit in a socket to get to those screws Quote
HolySheet Posted February 22, 2013 Report Posted February 22, 2013 Can you post a picture of what screws your trying to get out? I hope it's not your actual intake bolts, as those should be 10mm with washers. Quote
joewest Posted February 22, 2013 Author Report Posted February 22, 2013 I took some pics but there too big to upload im on my cell phone. Quote
joewest Posted February 22, 2013 Author Report Posted February 22, 2013 Its what holds the airbox to the intake Quote
HolySheet Posted February 22, 2013 Report Posted February 22, 2013 Take the boots off the carbs and pull the entire air box... Then once that is out you will be able to get to the screws and replace them. Quote
joewest Posted February 22, 2013 Author Report Posted February 22, 2013 Lol wow i feel dumb. Thanks man. Gonna work on it tomorrow. Yea alot of shit needs to be replaced on this bike. Def wasnt taken care of. Quote
SAVAGE420 Posted February 22, 2013 Report Posted February 22, 2013 ^^^^That. Then cut the heads off in seconds with a dremel, die grinder or saw., split parts, grab screws with vise grips, turn out, replace screws DONE! Quote
joewest Posted February 22, 2013 Author Report Posted February 22, 2013 Yea i got it now. Thanks. Lost all my common sense for a min. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.