fla_cracker Posted February 4, 2013 Report Posted February 4, 2013 I'm new to banshees and have a question. It may be dumb but when installing a 4 mil crank is there any machine work need to be done to the case? Quote
Infamous039 Posted February 4, 2013 Report Posted February 4, 2013 No machine work required, you can have you cases port matched to your cylinders though but not needed. Quote
fla_cracker Posted February 4, 2013 Author Report Posted February 4, 2013 Awsome. So just need to do port and polish the cylinders and add the spacer plate. O and carb, pipes, reeds and all the over odd and ends. I'm wanting to build a drag banshee Quote
sheerider11 Posted February 4, 2013 Report Posted February 4, 2013 Awsome. So just need to do port and polish the cylinders and add the spacer plate. O and carb, pipes, reeds and all the over odd and ends. I'm wanting to build a drag banshee No spacer plate. Get your stock head cut or custom cut domes for the 4 mil Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.