Blazen582 Posted December 5, 2012 Report Posted December 5, 2012 Polished 7 mil cub cylinder, pistons/rings, cool head, and 7 mil Twister Billet crank with 115 rods. Cylinders where ported by White Knucle, pistons almost look brand new, VERY little run time. Everything is in great shape. Crank is billet made by Twister, there are light marks on the flywheel end but I mean light, you cant feel them but you can see them. Will not effect anything. I will take any and as many pics as you want. I am not sure sure who makes the cool heal, I will get pics of the cool head tomorrow. It uses the regular domes same as pro design ( I know its not a pro design). I do not want to split this up. Buy it all 1200 shipped. http://s319.photobucket.com/albums/mm464/blazen582/7milcub/ Quote
sandman125 Posted December 5, 2012 Report Posted December 5, 2012 do you need ant case mods to run this setup? Quote
Finch Posted December 5, 2012 Report Posted December 5, 2012 yes need your cases trenched for a 7 mill crank. Quote
Finch Posted December 5, 2012 Report Posted December 5, 2012 good guy wish i had the dough for this. good luck blaze Quote
Blazen582 Posted December 5, 2012 Author Report Posted December 5, 2012 Thank you Finch. Yes he is correct, cases need to be trenched. Quote
bansheeboie Posted December 5, 2012 Report Posted December 5, 2012 I'm leaning toward grabbing this up. May sell my cheetah and grab this up. What hp#? And what are the domes setup for? Quote
whoppes27 Posted December 5, 2012 Report Posted December 5, 2012 out of curiosity, is there any harm in running a 7 mil crank in a set of cases trenched for a 10mil? Quote
Blazen582 Posted December 5, 2012 Author Report Posted December 5, 2012 I'm leaning toward grabbing this up. May sell my cheetah and grab this up. What hp#? And what are the domes setup for? Stand back up or fall and grab it! It wont be on here long. I do not know what HP, That is going to be a wide range depending on running it on gas, alky, pipes, and who tuning it. No domes comes with this. Quote
Blazen582 Posted December 5, 2012 Author Report Posted December 5, 2012 out of curiosity, is there any harm in running a 7 mil crank in a set of cases trenched for a 10mil? I was planning on running this set up in a set of 10 mil cases, I have been told with the little bit of difference it would not matter. However, I do not build motors.. Quote
bansheeboie Posted December 6, 2012 Report Posted December 6, 2012 Is this drag ported? Crank also have a maxload? Pm me Quote
quadpro26 Posted December 7, 2012 Report Posted December 7, 2012 has a TZ bearing, dune/drag ported alky domes Quote
Blazen582 Posted December 7, 2012 Author Report Posted December 7, 2012 has a TZ bearing, dune/drag ported alky domes has a TZ bearing, dune/drag ported alky domes Thank you QP.. I do not know what is gooing with the messages.. But I have answered all messages that I have recived. Quote
Hazzard Racing Customs Posted December 7, 2012 Report Posted December 7, 2012 Blazen is a top notch seller guys no worries on buying from him wish i had the extra cash this post would be done Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.