01bansheefox Posted November 30, 2012 Report Posted November 30, 2012 Stock carbs, dmc 916s, toomey 1 into 2 filter bike was lean so I.changed the stock pilot to 27.5 and mains to 300, now it idles high, cant figure out why.... Quote
dajogejr Posted November 30, 2012 Report Posted November 30, 2012 Is it possible you put the wrong slide in the wrong carb? Is the carb slide fully seated? Looking in through the back of the carb, do you see the little half moon shaped cut away on the bottom of the slide? Is the choke tube in place? Quote
01bansheefox Posted November 30, 2012 Author Report Posted November 30, 2012 Slides are good, choke tube is on.... Its not a high rev but higher than normal, can something be adjusted? Quote
01bansheefox Posted December 2, 2012 Author Report Posted December 2, 2012 Also has a bog at beginning when throttle is used Quote
Finch Posted December 2, 2012 Report Posted December 2, 2012 play with the air screws and idle? Quote
01bansheefox Posted December 2, 2012 Author Report Posted December 2, 2012 Air screws affect idle? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.