crank bearing noise.

[ric-ross1]

So i picked up a banshee crank, connecting rods are in great shape but i was spinning the left side bearing and it was making noises, that side was dry but the other side had alot of grease on it so it didnt make noise, i put some pb blaster on it but still sounds the same, i tried moving it up and down and side to side but it would not move at all.

Really appreciate your input guys.

[dirtydownunder]

stock crank ?

 

if its a stock crank, id send it to a shop and get it trued and welded, checked out and 2 outer bearings put on.

[ric-ross1]

yes it is a stock crank, i really want to get her running for a while and im going to get a stroker kit for it down the road maybe tax time but as of now i want to have a running banshee not one without a motor lol.

[sheerider11]

yes it is a stock crank, i really want to get her running for a while and im going to get a stroker kit for it down the road maybe tax time but as of now i want to have a running banshee not one without a motor lol.

So I'm just gonna be straight with you. Put it together then if you have no patience. It's cheap insurance. But if you do put it back together and it fucking explodes, don't come back asking what happened and complaining. It's your own fault for not taking advice and rushing

[ric-ross1]

Thanks for the honesty, it does spin but has that little noise any machine shop can press those?

[421alkybanshee]

dude, spend the little extra and have it trued and welded by a site sponsor. there are plenty on here that will help you. Done deal!