sprinklerman Posted September 24, 2012 Report Share Posted September 24, 2012 All prices OBO, and plus shipping i just thru this together: Cyls measure 64,4 mm so lots of bores left. (need bored,but no damage)head good. (150) SOLD Complete trans (75) The wiring harness,square plug (45) SOLD OEM stator -square plug,but i dont know year. ( i will ohm stator tomorrow to confirm its good) (50)SOLD both flywheels are good. (50 each)SOLD UMI air box filter adapter (like Pro Design)(15) Thumb throttle good. (10)SOLD Brake lever and master cyl good,but need to be bled and purged (10)SOLD Rear brake cyl good,needs purged as well. (10)SOLD Headlights look good,but i cant check them. worst thing is they might need bulbs. (40)SOLD 1 carrier has BRAND NEW bearings and seals (40)SOLD 1 carrier is used (id spend the 20.00 and get a bearing and seal kit (20) 2 good swing arms(25 each) heel guards need paint,they include pegs,,but dont have plastic parts.(80) also have good seat pan (15) cdi-sold coil -sold aluminum grab bar (10) 1 clutch cover (10) 1 stator cover(10) front and rear shocks (white) (40 rear ,40 for both fronts)SOLD (Rear still available) good lower A Arms(50) Rear axle,with nuts (40) front hubs(30) rear hubs (30) also have all other misc pieces from stock bike. "> "> "> "> "> "> "> "> "> "> "> "> Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted September 24, 2012 Report Share Posted September 24, 2012 Pics? Quote Link to comment Share on other sites More sharing options...
gomeznitro Posted September 24, 2012 Report Share Posted September 24, 2012 Pm sent Quote Link to comment Share on other sites More sharing options...
flynbyu Posted September 24, 2012 Report Share Posted September 24, 2012 do u have the complete rear brake system from pedal back or just the rear caliper and has the harness been cut up? Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 24, 2012 Author Report Share Posted September 24, 2012 do u have the complete rear brake system from pedal back or just the rear caliper and has the harness been cut up? Yes, i have the whole brake system,just havent had time to get the pix of all the little bits and pcs. Also harness has not been cut. there are a few spots where the factory electrical tape is/has unraveled . but no cut or messed up wires that i can see. Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 24, 2012 Author Report Share Posted September 24, 2012 The bike was just sitting on a back porch for some while. Thats why there is so much dust and dirt on everything. Quote Link to comment Share on other sites More sharing options...
gomeznitro Posted September 24, 2012 Report Share Posted September 24, 2012 Pm sent on flywheel Quote Link to comment Share on other sites More sharing options...
flynbyu Posted September 25, 2012 Report Share Posted September 25, 2012 pm sent on harness and brake stuff Quote Link to comment Share on other sites More sharing options...
DirtDiggler69 Posted September 25, 2012 Report Share Posted September 25, 2012 How about carbs , and boots and throttle cable? LMK Quote Link to comment Share on other sites More sharing options...
Abe Posted September 25, 2012 Report Share Posted September 25, 2012 What's the price for the CDI ? And do u know if it came from a running bike Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 25, 2012 Author Report Share Posted September 25, 2012 How about carbs , and boots and throttle cable? LMK Yes, i have carbs boots and a cable. You can have the stock cable with tors tops and a non-tors cable. But the carbs only have the tors tops. im taking more pictures today after work, i'll post some of the carbs and stuff along with it. Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 25, 2012 Author Report Share Posted September 25, 2012 What's the price for the CDI ? And do u know if it came from a running bike CDI is 40 shipped. Bike was running when it blew,but it has been parked on his porch for some time. If anyone knows how to test one id be happy to do it before shipping. IF<< i have time ,i can plug it into my wifes bike Thursday and check it that way. Quote Link to comment Share on other sites More sharing options...
gomeznitro Posted September 25, 2012 Report Share Posted September 25, 2012 Pm sent on flywheel are the flywheels available or not Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 26, 2012 Author Report Share Posted September 26, 2012 Sorry for delay. A tree limb broke my cable line ,,,so no internet untill this morn. Will post more pix and reply to all PM's as soon as i get caught beck up. Thanks ! Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted September 30, 2012 Author Report Share Posted September 30, 2012 Remaining parts still up for sale. Things like: Tank' Lower A Arms Frnt and Rear hubs axle swingers rear tires and wheels ( scorpions on stock wheels 40% tread) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.