jetting help

[fzank]

Hi Everybody,

I'm from Belgium and I've just finished to built up my banshee.

So now I have some problems in choosing a correct jetting... so I know that you have a lot of same questions but I will hope some of you can help me.

Here is my set up :

- Stock engine

- boyesen reeds

- oko 30mm

- spacers of 5mm between cylinder and reed cage

- FMF SST

- Open air box with a foam filter

 

 

So can you give me the best jetting for this set up

 

THANKS VERY MUCH

[Finch]

For someone to help ya gonna need elevation and temperature.

You could scroll threw this and see if someone has similar set ups http://bansheehq.com/forums/index.php?showtopic=99361

[fzank]

I'm at 250 meter up the sea level and the t° is 20c°.

I don't find a good set up for my oko 30mm.

Somebody told me the reason of this is , maybe, the oko carbs who need a k&n air filter without air box.... what do you think about that?

He told me the oko are compatible 2 stroke and for stroke and they don't work with airbox???

[fzank]

Do you think normal that with my set up a jet pilot of 55 is to small?

Till yesterday when I start from the stop position in first gear I have a bir Boooooh with no power I have to clutch I make a big throtle to start normaly... and yesterday I put at air srew 1/4 turn and the problem go away so I have to put a bigger jet than 55 but It's so big...

Do you think my problem can come from a air entrance from the case of engine? How can I check this?