Yamahopper10 Posted May 19, 2012 Report Share Posted May 19, 2012 http://s1097.photobucket.com/albums/g350/Yamahopper10/?action=view¤t=Banshee1.jpg 4 mill, trued and welded hotrod crank 115 mm rods , Fully ported cylinders by GT, 65.50 bore wiseco 795 series pistons,. 38mm mikunis setup for alcohol with billet bowls, i have gas needles and it can easily be switched back, pingel dual outlet, direct drive lockup clutch, 1-5 duneable override transmission, port matched case, billet intakes, vforce 3 reeds, lonestar +6 swingarm, whole motor is polished, CPI out of frames, smooth buff fronts, 12 paddle extreme staggerds on back. I had an 8 over swingarm on it, and had the intentions of switching it to gas, going to inframes and making it a duner...but I havent had time to ride lately, and probably wont have time at all this summer. The motor has under 5 hours on it, it was properly broken in with 3 heat cycles on gas. Runs very strong. I can send you to a link on youtube of me running it if interested. Price is 3950$, and im firm on it. I am located in Eureka, Missouri, about 30 miles west of st. louis. if you want more pictures, you may call or text me anytime 636 575 5262 Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted May 21, 2012 Author Report Share Posted May 21, 2012 I will take 3650 without the paddles..... Quote Link to comment Share on other sites More sharing options...
flyRTby Posted May 23, 2012 Report Share Posted May 23, 2012 That bike is like a set of perfect tits! Nice! Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted May 23, 2012 Author Report Share Posted May 23, 2012 thank you sir!, and the price is reduced to 3800!! this is a steal for whoever buys it. paddles and motor have 4 rides on them. those two together are well over the asking price! Quote Link to comment Share on other sites More sharing options...
Colby Posted May 23, 2012 Report Share Posted May 23, 2012 thank you sir!, and the price is reduced to 3800!! this is a steal for whoever buys it. paddles and motor have 4 rides on them. those two together are well over the asking price! interested in a 2003 R1 for trade ? Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted May 23, 2012 Author Report Share Posted May 23, 2012 I appreciate the offer but no thanks. Only trade I am interested in is a Seadoo RXP Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted June 11, 2012 Author Report Share Posted June 11, 2012 Nobody interested at all? 3650 for everything! Quote Link to comment Share on other sites More sharing options...
Yamahopper10 Posted June 16, 2012 Author Report Share Posted June 16, 2012 Bike is sold! Quote Link to comment Share on other sites More sharing options...
theshee Posted June 16, 2012 Report Share Posted June 16, 2012 I was about to make an offer on this bike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.