turbowrenchhead Posted May 18, 2012 Report Posted May 18, 2012 Is there an aftermarket piece available that I can bolt up to the case that will fix this issue? Is a case saver the same thing? Quote
blubyyou Posted May 18, 2012 Report Posted May 18, 2012 I run a T.M. Design case saver. It's plastic and has some give if the chain were to break. It fits over the shaft the sprocket goes on and is quite beefy. Well work the money I think. I personally like it much better than the metal ones. Quote
blubyyou Posted May 18, 2012 Report Posted May 18, 2012 If you need the case repaired find a shop that TIG welds and they should be able to repair it for you. Then install a case saver to keep it from happening again. Quote
VoOK Posted May 18, 2012 Report Posted May 18, 2012 I run a T.M. Design case saver. It's plastic and has some give if the chain were to break. It fits over the shaft the sprocket goes on and is quite beefy. Well work the money I think. I personally like it much better than the metal ones. x2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.