6mil'ster Posted April 28, 2012 Report Posted April 28, 2012 inkedupbiker needs help........................... This is my first time posting up here and I am in dire need of help!!! Okay where to begin, my 2001 blaster has TORS removed and new reeds, coil, stator, new flywheel key, and oil injection removed. My bike will start with one or two kicks but idles like a cammed up car "bing......bing......bing" instead of "bing.bing.bing.bing" when idling its shooting out greyish black smoke and when I give it gas it shuts off. I have the magneto cover removed while its running and I've noticed if I take my foot and apply pressure to the magneto while its spining it make the engine idle perfect then when i take my foot off it goes back to running horrible!!! I am extremely lost and don't know what to do any help or advice will be greatly appreciated!!! Quote
Dahl87banshee Posted April 28, 2012 Report Posted April 28, 2012 Best thing you can do in this situation is sell your blaster, and buy a banshee... Lol. Week ground somewhere? Chances are if it was running before you changed all that, then whatever you put on it is why it's not running right. Quote
sheerider11 Posted April 28, 2012 Report Posted April 28, 2012 So maybe timing is off. How much is the pick up gap? Quote
Dahl87banshee Posted April 28, 2012 Report Posted April 28, 2012 Have you tried urinating on it? Lmfao if he hasn't, I will for him Quote
SandmanPNW Posted April 28, 2012 Report Posted April 28, 2012 So a blaster is giving you troubles? I would hit up Ken O conner, he is the man when it comes to those. Quote
Buckwheat Posted April 28, 2012 Report Posted April 28, 2012 Maybe you used the wrong dremel tool when you ported it. Quote
sheerider11 Posted April 28, 2012 Report Posted April 28, 2012 So a blaster is giving you troubles? I would hit up Ken O conner, he is the man when it comes to those. x2. He even has videos to show you how to port everything. You can buy his templet and go at it. He's got a world record blaster. Quote
ClayAiken Posted April 28, 2012 Report Posted April 28, 2012 Dont mind the other guys. It sounds like your timing is off to me and its firing every other. Set the gap to .18-.20 on the flywheel then try it. Quote
Dicklez Posted April 28, 2012 Report Posted April 28, 2012 Dont mind the other guys. It sounds like your timing is off to me and its firing every other. Set the gap to .18-.20 on the flywheel then try it. Young lad. Can't you tell this is the blaster forum troll? Quote
ClayAiken Posted April 28, 2012 Report Posted April 28, 2012 Young lad. Can't you tell this is the blaster forum troll? What the Fuck. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.