Banshee Polished and Drag Ported top end w/ White Knuckle Head & Crank

[sfreak25]

I am looking to sell as a complete Package but will seperate these are on my wifes Banshee. I have a set of Nice Polished Drag Ported 350cc Banshee Cylinders with pistons that make about 67 rwhp with toomey t-5's and boysen reeds and stock carb but should make about 71 rwhp with cpi's and vforce 3 reeds. I also have a highly polished white knucke head with 18cc domes and it also comes with a brand new set of 18cc 4 mill domes both set up for 110 race gas. Last I have a nice trued and welded stock crank. I am willing to sell the cylinders w/ pistons for $350, the head w/ 2 sets of domes for $200 and the crank for $150 or the entire package deal for $600 and all prices are FIRM . The reason we am selling is because she just got a Twister Small Block 4 mill top end so this is not needed anymore, if you are interested please call me Shawn at 503-756-3716 Thank you PS This is still on the bike and the cylinder bore is 65 mm if I remember right.

 

 

 

 

[sfreak25]

Correction to the bore size, I just pulled the head off and they measured 65.75 so they are .70 over and you can go to .100 over so there are still 3 bores left in them

[sfreak25]

[sfreak25]

Here are some more pics of the Cylinders and Crank and by the way it is a Stock stroke Hot Rods Crank that is trued and welded and all bearings are in good shape. The Cylinders could use a hone ran through them and I would suggest new pistons and rings but you can run it as is that is up to you.

 

 

 

[sfreak25]

SOLD !!!! Thank you BooneDaddy87