sfreak25

Hi everyone, I wasted my time making this thread because I didn't get the hint the first time.. Hehe.

SOLD !!!! Thank you BooneDaddy87

Here are some more pics of the Cylinders and Crank and by the way it is a Stock stroke Hot Rods Crank that is trued and welded and all bearings are in good shape. The Cylinders could use a hone ran through them and I would suggest new pistons and rings but you can run it as is that is up to you.

Correction to the bore size, I just pulled the head off and they measured 65.75 so they are .70 over and you can go to .100 over so there are still 3 bores left in them

I am looking to sell as a complete Package but will seperate these are on my wifes Banshee. I have a set of Nice Polished Drag Ported 350cc Banshee Cylinders with pistons that make about 67 rwhp with toomey t-5's and boysen reeds and stock carb but should make about 71 rwhp with cpi's and vforce 3 reeds. I also have a highly polished white knucke head with 18cc domes and it also comes with a brand new set of 18cc 4 mill domes both set up for 110 race gas. Last I have a nice trued and welded stock crank. I am willing to sell the cylinders w/ pistons for $350, the head w/ 2 sets of domes for $200 and the crank for $150 or the entire package deal for $600 and all prices are FIRM . The reason we am selling is because she just got a Twister Small Block 4 mill top end so this is not needed anymore, if you are interested please call me Shawn at 503-756-3716 Thank you PS This is still on the bike and the cylinder bore is 65 mm if I remember right.

SOLD !!!

Still available

I never recieved your PM but if you are still interested let me know Thx

Thank you Phelps

I have a Brand New Never Used Direct Drive Lock Out Cover from Cascade Inovations. I bought this from Cascade whom had it Powder Coated Satin/Matte Black and then I sold my Banshee before I ever put it on so it is Brand New, it does have a few very small blemishes on the bottom of the cover as seen in pics but overall very nice. I have a new Banshee now and need a polished lock out cover so I am willing to trade straight across for a nice polished lockout cover or sell this one. I am asking $275 FIRM plus the ride or trade for a nice polished lock out cover, this is for the lockout cover and new clear cover only NO lock out. If you are interested please call me or send me a message, my number is 503-756-3716 and I a located in Sandy,OR near Portland

Sold Thx Beaven28

bump

By the way I can take Paypal

These are Dune ported and I am selling only the Cylinders.