erickson483 Posted April 22, 2012 Report Posted April 22, 2012 I would think 25 pilots are fine at like 2.5 turns on the air screw. Are you 100% sure the pilots are clear? Also What clip is the needle set at? Quote
gmjunkie13 Posted April 23, 2012 Author Report Posted April 23, 2012 (edited) I would think 25 pilots are fine at like 2.5 turns on the air screw. Are you 100% sure the pilots are clear? Also What clip is the needle set at? It seems lean so airscrews are .5 turn out. Best it has been so far since I've had it. And yea, pilots are clear. Been through the carbs completely about 5 times now...lol Needle pos # 3 stock as well. Edited April 23, 2012 by gmjunkie13 Quote
erickson483 Posted April 23, 2012 Report Posted April 23, 2012 Id remove the TORS. The thing is nothing but a headache. Rockymountanatv has a kit or like 46 dollars. That will at least eliminate any guess work with the TORS adjustment Quote
gmjunkie13 Posted April 23, 2012 Author Report Posted April 23, 2012 Id remove the TORS. The thing is nothing but a headache. Rockymountanatv has a kit or like 46 dollars. That will at least eliminate any guess work with the TORS adjustment I might just have to do this... Quote
Jackl Posted May 1, 2012 Report Posted May 1, 2012 (edited) I got the bog out of mine by adjusting the needle raise it one notch and see how that works for you. and bump on removing the tors they are garbage. Edited May 1, 2012 by Jackl Quote
gmjunkie13 Posted May 1, 2012 Author Report Posted May 1, 2012 I got the bog out of mine by adjusting the needle raise it one notch and see how that works for you. and bump on removing the tors they are garbage. Sounds good. I'll prob do this this weekend. I plan to eliminate TORS as soon as I have a few spare bucks not going into my money pit (minitruck) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.