bansheeyfz450 Posted April 10, 2012 Report Posted April 10, 2012 redid the the whole rear, stock swinger. how do i tighten the chain? This is what i did, pulled the axle carrier out, tightend the to bolts (chain tightening bolts) went on one ride and now chain needs to be tightend again. do I just back out the 2 bolts? Yes I did sinch the nuts. Thanks Quote
bansheeyfz450 Posted April 10, 2012 Author Report Posted April 10, 2012 The 2 chain bolts are almost all the way in. Quote
sheerider11 Posted April 10, 2012 Report Posted April 10, 2012 you have to loosen the 2 long bolts thatt go through the carrier. Quote
sheerider11 Posted April 10, 2012 Report Posted April 10, 2012 The 2 chain bolts are almost all the way in. did you replace the chain? if it comes down to it you have to take a link out Quote
shanYE west Posted April 10, 2012 Report Posted April 10, 2012 talk to camatv, he will tighten your chain for a great price yes.. Cam is the official BHQ chain tightening pro. Quote
Nutwood 472 Posted April 10, 2012 Report Posted April 10, 2012 ooooo how i love to laugh good for the soul Quote
Finch Posted April 10, 2012 Report Posted April 10, 2012 http://bit.ly/HYFaYd now would that of been so hard? Quote
bansheeyfz450 Posted April 10, 2012 Author Report Posted April 10, 2012 did you replace the chain? if it comes down to it you have to take a link out yes its a new x-ring chain. 104 is to long? Quote
bansheeyfz450 Posted April 10, 2012 Author Report Posted April 10, 2012 http://bit.ly/HYFaYd now would that of been so hard? never done that b4, great idea. I just figured it would be easier on there, guess not always. I am now guess my chain is to long. Quote
bansheeyfz450 Posted April 10, 2012 Author Report Posted April 10, 2012 Did you put in on inside out? lol Quote
Finch Posted April 10, 2012 Report Posted April 10, 2012 are you tightening it with the spring compressed? its supposed to be a lil loose when its got no weight on it? maybe pick up a clymers manual Quote
bansheeyfz450 Posted April 10, 2012 Author Report Posted April 10, 2012 are you tightening it with the spring compressed? its supposed to be a lil loose when its got no weight on it? maybe pick up a clymers manual I haven't tightend it yet. I was sitting on it and I had a buddy wiggle it. about 2 inches of play. I'm thinking of taking out a link. stock swinger/104 chain Quote
Finch Posted April 10, 2012 Report Posted April 10, 2012 Make sure it won't be two short then I did it last weekend was way to short after when it was too long before it will stretch the first ride or two so ya better off leaving it a lil loose ride it a bit then take a link out imo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.