slobanshee Posted March 19, 2012 Report Posted March 19, 2012 Can someone read this and help me in the proper direction for jetting. This was two wot only pulls. Thank you bhq Quote
andrew3160 Posted March 19, 2012 Report Posted March 19, 2012 I have not seen a chop like that before. Usually you are looking for a ring around the base of the porcelain. Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 Yea I'm all confused on this chop and have no clue which way to go Quote
Finch Posted March 19, 2012 Report Posted March 19, 2012 did ya ride around on it or warm it up with old plugs put those in did two pulls and take them out? Quote
Coupelx Posted March 19, 2012 Report Posted March 19, 2012 did ya ride around on it or warm it up with old plugs put those in did two pulls and take them out? i always get excited to see your avatar Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 Warmed it up on old ones. Swapped to these and made a 1-5th pull then killed and coasted. Then another pull back, killed it and coasted. Quote
Finch Posted March 19, 2012 Report Posted March 19, 2012 ya something not right this is my chop on 2 pulls Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 That's why I posted for advise lol. It's got me confused as hell. Quote
Finch Posted March 19, 2012 Report Posted March 19, 2012 ya to me looks like it was rode around on thats why i asked and was my main suggestion. how does it run? Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 (edited) Thats two wot pulls only. Maybe 3-6 seconds of anything else. It idles all day. Responsive right of idle. Weak midrange. Topend does ok but nothing like it should Edited March 19, 2012 by slobanshee Quote
andrew3160 Posted March 19, 2012 Report Posted March 19, 2012 I would venture to guess your pilot is rich and you are lean as hell on your main jet. That might explain why you have a weak mid range too. Just a guess though. Quote
Finch Posted March 19, 2012 Report Posted March 19, 2012 when ya kill it did ya hold open throttle and clutch till ya came to a stop? id try it again that was the only chop ive done now i just ride it around and see how it does and cheak the plugs every so often Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 (edited) Double post from phone. Sorry Edited March 19, 2012 by slobanshee Quote
slobanshee Posted March 19, 2012 Author Report Posted March 19, 2012 Has a 30 pilot and 360 main. Needle on middle clip. Iv done other chops with success. The ring being so high up has me confused. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.