Man-O-Steele Posted January 30, 2012 Report Posted January 30, 2012 So I recently bought a cascade chain guide and ran across a problem. On a stock swing arm the chain guide sets between the frame and swing arm. My Jl swing arm had about a 3/4" gap between the arm and the guide. I'm worried that the guide will want to slip off to the right because nothing is keeping from sliding over besides the chain. Any suggestions would be appreciated. Quote
RadarRacing Posted January 30, 2012 Report Posted January 30, 2012 Make a spacer outta black pvc or something and you'll be cool. Quote
06specialedition Posted January 30, 2012 Report Posted January 30, 2012 It just won't slide on all the way? Can you dremel the chain slider a little bit where it goes on the swingarm? So it slides on further and sits flush... Quote
Man-O-Steele Posted January 30, 2012 Author Report Posted January 30, 2012 I thought of that just disnt want to use pvc. Got ahold of John he made it right. Thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.