jamiesaparty Posted January 17, 2012 Report Posted January 17, 2012 im rebuilding my shee, and i want to make sure everything is right so i was just wondering what you guys would put in for jetting the cylinders are bored to 66.5 mm and i have fmf gnarly pipes with power core 2 silencers. also what gas mixture should i run. thanks for looking and any advice! Quote
Surfrjag Posted January 19, 2012 Report Posted January 19, 2012 do some research... the jetting depends on your intake setup, your porting, altitude, and it double checked with plug chop. if i had to guess i would say start with a 300 main jet. most people run 32:1 oil mix. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.