monstermike Posted January 17, 2012 Report Posted January 17, 2012 No fire at all. Blah blah blah. Been through it b4. I've rewired my bike a few times and know it very well Checked resistance on red /green 19.9. Good ignition Checked whitered /white green. I forgot what I got but it was goo Checked yellow black. Which is lighting and got nothing. Checked coil. And read .4 which is high. .37 is the limit Ima plug my coil into my buddies shee to see if that's what it is. In a few days. But just seeing. If anybody ha any info If the lighting is bad is the whole stator bad??? Im stuck this time Last time my dam woodruff key broke so no fire from no spin of flywheel Quote
sheerider1026 Posted January 17, 2012 Report Posted January 17, 2012 ignition side should ohm out somewhere between 13.7 and 20 ohms .. also touch your leads together on your meter to see what resistance the leads are making.. subtract this number from the reading you get when ohming the stator. i sent you a pm.. Quote
monstermike Posted January 18, 2012 Author Report Posted January 18, 2012 Ima check it today. After work Quote
monstermike Posted January 19, 2012 Author Report Posted January 19, 2012 It was the cdi. I had one of the wires wired up wrong Last time I was in a hurry and didnt realize what I did tested it on my buddy's shee Thanks though Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.