too_fazt Posted January 4, 2012 Report Share Posted January 4, 2012 Im parting out my bike. Im starting with the top end. (this has 0 hours, just mocked up for a show) 392 cub w/ cleanup port from M&M (replated about a month ago from millenium, have receipt from M&M. Never ran, just mounted) stud extenders and water plugs 2 pistons for 110 rod Coolhead with cut 18cc domes (for av gas at sea level) Id like to get $1,000 for this setup i also have vf2 reeds and polished reed spacers with hardware if anyone is interested for a slightly raised price. also stock welded crank if interested in entire setup. This engine is a beast Quote Link to comment Share on other sites More sharing options...
too_fazt Posted January 5, 2012 Author Report Share Posted January 5, 2012 New price shipped $$$$$850 come get it!!!!!! Quote Link to comment Share on other sites More sharing options...
wizeass2005 Posted January 5, 2012 Report Share Posted January 5, 2012 So how do you make a 392? Is that a stock stroke by 68mm bore? Quote Link to comment Share on other sites More sharing options...
mauro78 Posted January 5, 2012 Report Share Posted January 5, 2012 (edited) may be Im asking something stupid, but, this cyl has been ported ? have you better pictures of intake, exhasut and ports ? thanks. Edited January 5, 2012 by mauro78 Quote Link to comment Share on other sites More sharing options...
too_fazt Posted January 5, 2012 Author Report Share Posted January 5, 2012 Stock stroke 68mm. These will bolt right up to ur stock crank nothing else needed. And yes they are out of the box ported. Quote Link to comment Share on other sites More sharing options...
topgunxxx Posted January 5, 2012 Report Share Posted January 5, 2012 Im parting out my bike. Im starting with the top end. (this has 0 hours, just mocked up for a show) 392 cub w/ cleanup port from M&M (replated about a month ago from millenium, have receipt from M&M. Never ran, just mounted) stud extenders and water plugs 2 pistons for 110 rod Coolhead with cut 18cc domes (for av gas at sea level) Id like to get $1,000 for this setup i also have vf2 reeds and polished reed spacers with hardware if anyone is interested for a slightly raised price. also stock welded crank if interested in entire setup. This engine is a beast HI THERE CAN YOU PLEASE SEND ME PHOTOS OF THE PARTS?? (k.moumousis@eurotank.gr) I RUN STOCK CRANK... WHAT WOULD BE THE COST TO USPS TO ATHENS/GREECE? THANKS Quote Link to comment Share on other sites More sharing options...
Man-O-Steele Posted January 5, 2012 Report Share Posted January 5, 2012 Were you runnin a lockout? Id be interested in that setup Quote Link to comment Share on other sites More sharing options...
too_fazt Posted January 5, 2012 Author Report Share Posted January 5, 2012 no lockup....will hold with an hp clutch set, which i have.....0 hours, m&M's hp clutch set, can be included. Quote Link to comment Share on other sites More sharing options...
mookie Posted January 5, 2012 Report Share Posted January 5, 2012 Pm sent Quote Link to comment Share on other sites More sharing options...
mookie Posted January 5, 2012 Report Share Posted January 5, 2012 Pm sent Quote Link to comment Share on other sites More sharing options...
too_fazt Posted January 5, 2012 Author Report Share Posted January 5, 2012 pending payment!!!! Quote Link to comment Share on other sites More sharing options...
bad 350 shee Posted January 5, 2012 Report Share Posted January 5, 2012 bump for a good seller Quote Link to comment Share on other sites More sharing options...
gotnos Posted January 6, 2012 Report Share Posted January 6, 2012 this is a great set up i have had the 358 and 392 on a light weight frame no lock up and just an override and on alky it works great with big carbs like 40mm Quote Link to comment Share on other sites More sharing options...
too_fazt Posted January 11, 2012 Author Report Share Posted January 11, 2012 thanks for the good words guys... SOLD AND SHIPPED. THANKS MOOKIE, ENJOY Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.