Jump to content

Recommended Posts

Posted

I have a 2002 banshee just did the 421 serval kit with chariot intake and pj 34mm carbs problem is the one carbs fuel line is directly under the exhaust pipe and i can't adjust it past was wondering if the fuel in line on carb could be changed or if there is another exhaust I could use I have fmf fatty right now.

Posted

use a zip tie to pull the line over.. you could go with a longer line so you can route it different

the outlet on the carb is directly under the exhaust within a 1/8th inch so i cant avoid it.

Posted

wonder if you could grab the inlet flange on the carb and carefully twist it down a little bit.....i believe they are a press fit and that's it.

 

Also you could try either reed spacers or angled intake boots to try and get that intake nipple moved...

Posted

X2 on moving the fuel inlet nipple unless you see glue or solder you can carefully turn the pipe.

 

I used a Phillips screw driver that fit snug in side and used my fingers to move it , no leaks after.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...