aligfal90 Posted December 2, 2011 Report Posted December 2, 2011 (edited) i just installed tors kit and removed the filter box and installled k and n filters on the carbs anfd my banshee is bogging. And one more thing the throotle is reaally loose for about 4 mm it wont accelerate, it also turns off when im not moving . im using 280 jets. heeeelllp plzzz!!!!!!!!!!!!!! t5 pipes v force 3 coolhead 22 domes Edited December 2, 2011 by aligfal90 Quote
scorpo04 Posted December 21, 2011 Report Posted December 21, 2011 Sounds like its starving for fuel and u didn't adjust your throttle play... i would say move up to a biggee pilot jet... make sure your carbs are synced and idle is re-set Quote
06specialedition Posted December 21, 2011 Report Posted December 21, 2011 i just installed tors kit and removed the filter box and installled k and n filters on the carbs anfd my banshee is bogging. And one more thing the throotle is reaally loose for about 4 mm it wont accelerate, it also turns off when im not moving . im using 280 jets. heeeelllp plzzz!!!!!!!!!!!!!! t5 pipes v force 3 coolhead 22 domes Did you jet up for your air filter change? Make sure your carbs are synced and there is a little slack in your cable, but not too much. Quote
sleeper06 Posted December 25, 2011 Report Posted December 25, 2011 27.5 pilots ,300 mains in cool weather needle 4th clip.Buy a carb sync tool and watch the syncing process in one of these forums,did you install your idle screws? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.