bansheemxkris Posted October 24, 2011 Report Posted October 24, 2011 I just bought a new banshee and here is the info i got from the previous owner... Cool head with 19cc domes, drag port, stock carbs, toomey t5s. I took the bike to little sahara last weekend and it would bog with low rpms, get crazy mid range, and cut out top end. It was also over heating which made me think it was too lean. I raised the needle one notch and it cleaned it up a little but it was hell to kick start. Any ideas where i should start? I have no idea what jets are in it now. I am going to take it apart tonight. Quote
bansheemxkris Posted November 1, 2011 Author Report Posted November 1, 2011 Took everything apart and here is what it is currently set up as. Looks to be a dune/drag port job, .40 over wiseco, 18cc cool head, stock carbs 310 main: 25 pilot, stock reeds with aftermarket pedals, Toomey T5's. Dont know the compression. I forgot to do it before i tore it down. Quote
bansheemxkris Posted November 1, 2011 Author Report Posted November 1, 2011 Just took the intakes off and there isnt much porting at all. Maybe just a clean up. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.