hurst1979olds Posted October 13, 2011 Report Share Posted October 13, 2011 I have an 03 Banshee that has extremely low hours on it. I myself probably put 150hours on it. I never rebuilt the top end and to my knowlegde it has never been. It had 100psi of compression. I took the top end off and the cylinder walls look good. Still has a good crosshatch. Pistons look good. No scratches. I measures the bore and it is still a 64mm so I know its never been bored. I want to just slap rings on it and go. Who makes good rings to go onto stock pistons other then OEM? Also I found Cometic gaskets that say its for 66mm bore. Will these work on a stock 64mm? I know the correct thing to do is have it bored and honed, and new pistons. But I'm on a little bit of a budget. I just want to be riding again. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.