90Bansheedude Posted September 24, 2011 Report Posted September 24, 2011 Im rebuilding a banshee, and got the rear caliper polished and put on, but realized that there is way too much slop in the slide pins, and the boot is missing on the larger of the 2. Does anyone know were these can be found? Or does anyone have the boot for the larger, and the pin/bolt for the smaller? Thats what I really need. If I cant find the pin, I can make one (but id rather just find one), but the boot, not so much. Brian =) Quote
bansheesandrider Posted September 25, 2011 Report Posted September 25, 2011 Im rebuilding a banshee, and got the rear caliper polished and put on, but realized that there is way too much slop in the slide pins, and the boot is missing on the larger of the 2. Does anyone know were these can be found? Or does anyone have the boot for the larger, and the pin/bolt for the smaller? Thats what I really need. If I cant find the pin, I can make one (but id rather just find one), but the boot, not so much. Brian =) Some aftermarket caliper rebuild kits include them. Quote
90Bansheedude Posted October 12, 2011 Author Report Posted October 12, 2011 I see the kits you are talking about that have the bolts for the pads, but I have yet to find one with the bolts for the caliper, or the oem partsfinder doesn't show them either. I guess its considered part of the caliper. Anyone have any that aren't worn out that they can spare? Or any other ideas were I can get them? Quote
slipknot23 Posted October 13, 2011 Report Posted October 13, 2011 http://cgi.ebay.com/ebaymotors/?cmd=ViewItem&_trksid=p3984.m1423.l2649&item=400242607507&sspagename=STRK%3AMEWAX%3AIT hope that helps Quote
Midway USA Posted October 13, 2011 Report Posted October 13, 2011 (edited) You can get the boots from the dealerl. I just ordered a couple the other day for my Warrior. Same part number as the Banshee. They are about $2.50 each. Part number 1UY-25917-51 1 boot per package Edited October 13, 2011 by Midway USA Quote
90Bansheedude Posted October 15, 2011 Author Report Posted October 15, 2011 http://cgi.ebay.com/...RK%3AMEWAX%3AIT hope that helps Boots maybe right, but those are the brake pad pin bolts, I need the actually bolts that hold the caliper to the bracket and allow it to self align to the brake disc. Quote
90Bansheedude Posted October 15, 2011 Author Report Posted October 15, 2011 You can get the boots from the dealerl. I just ordered a couple the other day for my Warrior. Same part number as the Banshee. They are about $2.50 each. Part number 1UY-25917-51 1 boot per package Thanks, so now I got the boots covered either in a kit or separately, just need to find those dang caliper bolts! As hard as it is seaming to find some, I may just machine some, if I end up with some spare time before I find some bolts. lol Quote
Midway USA Posted October 15, 2011 Report Posted October 15, 2011 Thanks, so now I got the boots covered either in a kit or separately, just need to find those dang caliper bolts! As hard as it is seaming to find some, I may just machine some, if I end up with some spare time before I find some bolts. lol I am sure the dealer can get the bolts too. I wouldn't think they would be that expensive, but I could be wrong. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.