jlsparky7 Posted August 12, 2011 Report Posted August 12, 2011 (edited) Enjoy Full reassembly vids with torque specs and everything included coming soon! Part 1 Part 2 Edited August 12, 2011 by jlsparky7 Quote
bansheesrtoys Posted August 12, 2011 Report Posted August 12, 2011 (edited) o n the clutch pressure plate you don't have to take off the middle nut that comes off with the pressure plate when you take off the 6 bolts.on the crank bearings. the little pins sit in the groove on the bottom half of the case not the holes you said. and you should really wash the outside of the cases befor ripping into a motor, so you don't get anything in the bearings or the trans.besides that nice vids Edited August 12, 2011 by bansheesrtoys Quote
jlsparky7 Posted August 13, 2011 Author Report Posted August 13, 2011 o n the clutch pressure plate you don't have to take off the middle nut that comes off with the pressure plate when you take off the 6 bolts.on the crank bearings. the little pins sit in the groove on the bottom half of the case not the holes you said. and you should really wash the outside of the cases befor ripping into a motor, so you don't get anything in the bearings or the trans.besides that nice vids You mean the 6 bolts on the clutch pressure plate? I take the nut off cause I like to readjust it and im gunna do a vid on the adjustment Im pretty sure there are no groves that you speak of where the crank bearing rides but i will double check I took apart everything and washed it plus most of the bearings are being replaced anyways so i don't mind if they got dirty. Thanks for watching. Quote
bansheesrtoys Posted August 13, 2011 Report Posted August 13, 2011 (edited) mmmm i can see the grooves in your vid. Even in the clymer manuel shows how they should sit. at 3.19 in your vid if u look where the doll pin is under that towards crank their r grooves that where those bearing pins sit. Edited August 13, 2011 by bansheesrtoys Quote
bansheesrtoys Posted August 13, 2011 Report Posted August 13, 2011 (edited) thanks slipknot for the pic , i have a prob posting pics and couldn't really explain any better than i did. Now jlsparky do you see them. keep the vids coming they are good. Edited August 13, 2011 by bansheesrtoys Quote
jlsparky7 Posted August 14, 2011 Author Report Posted August 14, 2011 Pic didnt work. Ill include those details on the rebuild vid. Didnt really follow the clymers that closely for disassembly. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.