CanadianRider Posted August 12, 2011 Report Posted August 12, 2011 i recently bought an 03 banshee not running, the motor was just rebuilt from previous owner. the tors was messed up so i removed it and installed the eliminator kit. it runs now and idles great,but at first i would get a bog of idle and it would clear up,then it would bog at 3/4 throttle. i set the floats to 20mm and the bog off idle was gone. but it still will bog at half throttle 25 pilot 200 main y151 needle in middle(3rd) 2500ft 2 turns on air/fuel screw any suggestions?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.