Frame fender mount broke off

[97bansheeguy]

I just bought a 97 banshee and I am going to totally restore it. After I bought it I noticed that the left rear fender mount that is welded to the frame is missing. I was wondering can you buy parts like that or would I have to fabricate my own. I don't want anyone to notice that it's been rewelded, because I'm planing on it to be a badass quad with about a full years worth of work done to it.

[Dicklez]

I just bought a 97 banshee and I am going to totally restore it. After I bought it I noticed that the left rear fender mount that is welded to the frame is missing. I was wondering can you buy parts like that or would I have to fabricate my own. I don't want anyone to notice that it's been rewelded, because I'm planing on it to be a badass quad with about a full years worth of work done to it.

 

Make one, weld it on and grind the welds. Never know.

[Josh Z]

weld it on.

[Jereme6655]

funny part.......while your trying to figure out how to put one on and make it looks stock there are alot of others on this site who are taking those off for a cleaner look while run cut rear fenders. i bet if you just asked aroudn in the shout box somone will probably be taking one off and you could just pay the shipping and they'll send it to you

 

one suggestion i will make (if your goin to run cut OR full fenders) is if you fabricat your own make sure you pay attentino to where the mount location goes. they are not mounted in the same spots from left side to right side (viewed as sittting on the bike). so if you ever want to run cut fenders and dont want to have it flapping all over you'll have to cut your fenders a little different on the left side. OR you could just fabricate that bracket with 2 holes in it.....on lower for full fenders to mount in the normal spot and one that's a little higher to mount it in the matching spot as the right side mounts to....