eldreder Posted July 4, 2011 Report Posted July 4, 2011 i have a mild ported motor that i just finished and the clutch is slipping a little, what would be the best setup to run with my motor? Quote
bad 350 shee Posted July 5, 2011 Report Posted July 5, 2011 i have a mild ported motor that i just finished and the clutch is slipping a little, what would be the best setup to run with my motor? i run tusk clutches with no problems Quote
bobjunior Posted July 5, 2011 Report Posted July 5, 2011 i run tusk clutches with no problems Use a heavier spring on every other one it will help alot and I also use R-1 clutches out of a motorcycle Quote
252wheelieking Posted July 5, 2011 Report Posted July 5, 2011 I had the same problem with the tusk clutches & my set-up is in my sig. I brought the dune/play clutch kit from driveline performance & problem solved. They have yfz 1000 motorcycle fibers, smooth steel plates & heavy duty springs. Quote
bad 350 shee Posted July 5, 2011 Report Posted July 5, 2011 Use a heavier spring on every other one it will help alot and I also use R-1 clutches out of a motorcycle i run hd springs on all of them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.