96bansheepilot Posted June 27, 2011 Report Share Posted June 27, 2011 (edited) 465cc Cub ported by Trinity. wiseco pistons Wicked cast crank high load 10 ball and TZ bearings. trenched by Wicked. About 14 passes on engine. About 1.5-2 hours run time. +10 moly arm by slc quad customs 20-8-10 american racers w/ 40mm fireball axle. struted rear w/ Wicked/ Marvin shaw front asphalt shocks -2 moly chromed arms w/ 10x2 wicked wheels/tires w/ front brakes. Wicked back rest and low profile seat 41mm pwk carbs w/ billet intakes and long pod filters. v force 3 reeds shearer small bore nickel pipes noss head w/ 24cc domes 1-5 wcr override w/ neutral down and all micropolished. new forks Ported cases by wicked billet water pump impellar direct drive lock up w/ direct drive castings clutch cover, polished drag handlebars by wicked dyna ignition w/ programming software and switched clutch lever for launch limiter. stock frame that hasn't been cut on. 60 inch wheelie bar made from chromoly Adjustable timing plate Much more just ask. Bike has been to the track twice since being built has been 6.46 @ 99 and 1.44 60 foot on race gas w/ 190lbs of rider and gear. thats w/ full stock frame, gas, brakes, the whole nine. Sure it has much more in it. Just gotta tweak it. Call me if interested. I won't check this thread everyday. Looking to get 6800.00 If you want it for less, I'll go lower but thing will start comin off the bike. (for example, if you want stock ignition, I'll throw it back on the bike and take the dyna off and lower the price.) I'm in Tampa, FL 813-997-5718 Leave a message if I don't pick up. Please don't waste my time. Don't call if you don't have the cash. Thanks guys. Never mind the pics below. Those are very old and a totally different setup. email me and I'll send pics... yardwars08@yahoo.com Edited June 27, 2011 by 96bansheepilot Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted June 27, 2011 Author Report Share Posted June 27, 2011 (edited) OK i've updated the pics in the signature they are current. Except in the pic are 34pj's and now I have the 41's w/ billet bowls. Edited June 27, 2011 by 96bansheepilot Quote Link to comment Share on other sites More sharing options...
BEER BIKES Posted July 13, 2011 Report Share Posted July 13, 2011 Do u still have the motor, if so would u sell the motor and pipes, very interested if u do Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted July 14, 2011 Author Report Share Posted July 14, 2011 I am willing to part the bike out. Call me and I'll let you know what I can do. 813-997-5718 If you are the person calling from georgia, leave me a message if I don't pick up. Some person was calling today and I can't seem to get them to answer when I call back. Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted July 19, 2011 Author Report Share Posted July 19, 2011 Bump, any one looking to get a quick, high end bike for WAY less than you can build one? Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted July 20, 2011 Author Report Share Posted July 20, 2011 New offer, Lowering the price to 5,500 but I'll offer the bike w/ stock reeds/cages, no adjustable timing plate, no plastics, and stock ignition. You can't beat that. A bike that hauls ass for a price you can't build it for. Buy a beat to heck banshee and try to modify it like this and you can't come close. Get it now! I've got this much in just the engine. Quote Link to comment Share on other sites More sharing options...
bigboy Posted August 17, 2011 Report Share Posted August 17, 2011 Where did you get your wheelie bar? I looking for one just like that one. Quote Link to comment Share on other sites More sharing options...
chrisp250r Posted August 18, 2011 Report Share Posted August 18, 2011 pipes big bore or small? Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted August 19, 2011 Author Report Share Posted August 19, 2011 I bought the materials to build it from Applied racing technology and I had my cousin tig weld it. Came out great. love the wheelie bar. All I had to do was weld a mounting bar on the frame and the other two mounting points are on the carrier bolts. The materials alone were 186.00. They are all cromoly except the wheel housing. That is regular steel. Let me know if you want it. I'm parting out the bike come this November. Where did you get your wheelie bar? I looking for one just like that one. Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted August 19, 2011 Author Report Share Posted August 19, 2011 They are small bore pipes. Matt at Shearer said the small bores run harder than the big bores on my engine. So that is what I bought. They run great. pipes big bore or small? Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted November 27, 2011 Author Report Share Posted November 27, 2011 (edited) Still for sale. come with your offer if you have one. bike has not run at track since May 2011. Bike is now at 5500.00 Call me 813-997-5718 Paul Edited November 27, 2011 by 96bansheepilot Quote Link to comment Share on other sites More sharing options...
96bansheepilot Posted November 27, 2011 Author Report Share Posted November 27, 2011 Will sell for 5000.00 without the pipes. Come get it in Florida. -Paul Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.