blubyyou Posted June 17, 2011 Report Posted June 17, 2011 I need a little help reading my plug chop. I did it in 5th gear due to lack of room. I plan to get a good 6th gear pull in the near future but was wandering how this one looked. I'm not really good at posting pics but can email them if someone would give me an email address to send them to. Any other info you all would need just ask and I will provide it. Thanks. Quote
06specialedition Posted June 17, 2011 Report Posted June 17, 2011 I need a little help reading my plug chop. I did it in 5th gear due to lack of room. I plan to get a good 6th gear pull in the near future but was wandering how this one looked. I'm not really good at posting pics but can email them if someone would give me an email address to send them to. Any other info you all would need just ask and I will provide it. Thanks. Load them on photobucket, then downsize them and put them on here. Super easy Quote
blubyyou Posted June 17, 2011 Author Report Posted June 17, 2011 hope these pics help out a little for you all.....like I said it was 5th gear chop( I ran out of room) Quote
blubyyou Posted June 17, 2011 Author Report Posted June 17, 2011 Right now I have pwk 35 air strikers with 150 mains and 48 pilots CEL needle in the middle clip. This is on my 4mil HJR aggressive dune/play port with a lot of bolt ons and around 2400 ft above sea level. Do you all think I'm way off or just a jet or two large? Quote
blubyyou Posted June 17, 2011 Author Report Posted June 17, 2011 Also does the pics look like a good plug chop or not? Quote
blubyyou Posted June 17, 2011 Author Report Posted June 17, 2011 Thanks. I will try that out. I just about wiped the shee out doing that chop ...5th pinned on a bumpy, rocky strip of trail, and running out of road, trying to shut it down and get stopped lol! Any other opinion are welcome. Quote
Silentsoul Posted June 17, 2011 Report Posted June 17, 2011 I was wondering exactly how long to run the plug before you chop it? Not trying to hi-jack your thread, I'm fixin to be in the same boat as you are, so just tryin to get a little info. Quote
blubyyou Posted June 17, 2011 Author Report Posted June 17, 2011 I like to go about 3 seconds pinned wide open in 5th or 6th. Then shut it down and pull the plugs. I emailed Kevin my pics today and he said it looked great but I could probably go to a 148 main and be good to go. Any other suggestions from the experts is greatly appreciated. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.