BansheeBoy347 Posted June 14, 2011 Report Posted June 14, 2011 How do I replace the rods on the crank? Quote
bansheesandrider Posted June 14, 2011 Report Posted June 14, 2011 How do I replace the rods on the crank? By splitting your cases and removing the crank to be sent to a rebuilder, who will rebuild it and true & weld it. It is not a job for a do it yourselfer at home in his garage. You can split the cases yourself. Quote
crustydemon Posted June 14, 2011 Report Posted June 14, 2011 By splitting your cases and removing the crank to be sent to a rebuilder, who will rebuild it and true & weld it. It is not a job for a do it yourselfer at home in his garage. You can split the cases yourself. Yep. Quote
lms1977 Posted June 14, 2011 Report Posted June 14, 2011 I have done 3 dirtbike cranks and that was not to bad you have to press the two halves apart then press it back together and then true it up it takes a machine shop. I will not be doing my own banshee crank if it ever needs it it will get sent out to make sure it is right. not saying you can't do it I would recommend sending it to a shop. Quote
252wheelieking Posted July 25, 2011 Report Posted July 25, 2011 (edited) Better to just buy another crank. whats the difference in a new crank & a rebuilt one if all parts are new on rebuilt crank? Or your saying it better far as cost issue? Edited July 25, 2011 by 252wheelieking Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.