crustydemon Posted June 10, 2011 Report Posted June 10, 2011 I need someone to write me a custom curve for my Dyna. Let me know who's closest to me as I assume I need to put it on the dyno. Quote
camatv Posted June 10, 2011 Report Posted June 10, 2011 some places adn shops already have curves figured out and ready as a download.. Quote
crustydemon Posted June 10, 2011 Author Report Posted June 10, 2011 That would be ok I guess. We have a Land and Sea crank dyno at work I could put it on just to pull some numbers to see when it's coming on and give someone my engine specs. Maybe that would work too? I dont know. Quote
dirtydownunder Posted June 10, 2011 Report Posted June 10, 2011 M&M programme dynas, they may have a map, try them. but every motor is different, and a curve should be programmed to a specific setup. Quote
Snopczynski Posted June 10, 2011 Report Posted June 10, 2011 I can program one with the specs, I have done quite a few. Quote
crustydemon Posted June 10, 2011 Author Report Posted June 10, 2011 Ok Snop, I'll have you do it. I'll get my port timings and specs rounded up and let you know. Thanks. Quote
Snopczynski Posted June 10, 2011 Report Posted June 10, 2011 Ok Snop, I'll have you do it. I'll get my port timings and specs rounded up and let you know. Thanks. I need to know absolutely everything. Even elevation, fuel, # of paddles on the bike, etc....... Quote
BigRed350x Posted June 10, 2011 Report Posted June 10, 2011 I'd have snop do it. I'm pretty sure he's done enough of them to get you a nice curve. Quote
crustydemon Posted June 11, 2011 Author Report Posted June 11, 2011 I need to know absolutely everything. Even elevation, fuel, # of paddles on the bike, etc....... Ok, I'll get it all for you soon. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.